Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Cambridge?
Garage door work in Cambridge typically costs between $150 and $600, depending on what’s failing and which parts are involved. A cable or roller fix usually lands in the low hundreds, a spring replacement sits around $180 to $340 for a single spring, and a full new door installation runs $700 to $2200. Every job here is priced by a written estimate, so the number you get in writing is the number you pay.
The range sounds wide because a garage door is a system, not a single part. Springs, cables, rollers, tracks, panels and the opener all wear at different rates, and what you describe on the phone (“it won’t open”) can have four or five different causes. Our technicians have up to 11 years of experience, garage doors are all we do, and we diagnose the actual failure before quoting anything. Free estimates, upfront pricing, and a satisfaction guarantee on the work.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs run in Cambridge. These are typical estimated ranges for 2026, not a quote. The written estimate you get on site sets the final price.
| Job | Typical estimated range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair, one spring | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A note on springs: that $180 – $340 range covers one spring. Garage doors almost always carry a matched pair, and when one breaks the other has taken the same cycles, so the pair is usually replaced together. Expect a pair to cost about twice the single-spring range. We’ll tell you honestly whether the second spring has life left in it or whether replacing both now saves you a second visit later.
What pushes a job toward the top of a range? A door that’s been run for weeks on a broken spring can bend tracks and chew through rollers, turning a spring job into a spring-plus-track job. A door panel that’s cracked rather than dented needs a new panel instead of a repair. An opener that’s failing because the door itself is binding needs the door fixed first, then the opener diagnosed. What pushes a job toward the bottom? Catching a problem early. A noisy door with worn rollers is a $110 – $220 job; leave it and the same rollers can stress the opener and the springs.
What Affects Garage Door Pricing in Cambridge
Cambridge isn’t a one-size housing market, and the door you own says a lot about what a repair will cost. Here are the factors that move the number.
- The age and type of your door. Cambridge has a lot of older housing stock, and plenty of those garages still have original wood-frame doors with older hardware. Wood doors can need panel repair rather than replacement, but the hardware on them is often tired, so a single visit can turn up two or three worn parts at once. Newer steel doors in the triple-decker conversions and infill buildings around Cambridgeport and Riverside tend to need just the one failed part.
- Brand and opener compatibility. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, which covers the vast majority of hardware in Cambridge garages. When your opener matches a brand we know cold, diagnosis is quick and parts are straightforward. When it doesn’t, we’ll say so before quoting.
- Whether it’s one spring or a pair. As above, this is the single biggest swing in the most common job. A single spring is $180 – $340; a matched pair is about double that.
- Door size and weight. A single-car door in a tight Cambridge carriage house is a lighter job than a double door or a commercial-grade roll-up on a small business. Bigger, heavier doors mean heavier springs, heavier hardware, and more labor.
- How long the problem has been running. A door that stopped working and got fixed the same week is cheaper than a door that’s been forced open and closed for a month. Forcing a binding door is the fastest way to turn a $130 – $250 cable job into a $500 repair.
- Access and parking. Cambridge garages are often tight – alley access, shared driveways, cars parked in front. That can add time to a job, and we’ll flag it in the estimate rather than surprise you at the end.
If you’re weighing repair against replacement, our Cambridge Garage Door Repair Pros team can walk through your specific door and give you both numbers side by side.
How to Save on Garage Door
You don’t need a coupon to keep a garage door bill down. You need to fix the right thing at the right time.
- Fix the spring before you force the door. A broken spring means the door is being lifted by the opener alone, and openers aren’t built for that. Every force-open cycle wears the opener, the cables and the tracks. A $180 – $340 spring job stays a spring job only if you stop using the door.
- Don’t replace the opener when the door is the problem. A door that’s hard to lift, jumps on the way up, or reverses for no reason is often a door problem, not an opener problem. Diagnosing the door first can save you a $250 – $550 opener installation you didn’t need.
- Replace rollers and cables in sets, not one at a time. Rollers wear at the same rate. Replacing one leaves the other eleven doing the work, and you’ll be back. A full roller set at $110 – $220 once beats three single-roller visits.
- Ask for a written estimate before work starts. We give free estimates and quote per job, so you know the number before anything is touched. Call (866) 254-2156 and we’ll set it up.
- Catch noise early. A door that squeaks, shudders or hesitates is telling you something’s worn. That’s a cheap visit now versus a bigger one later.
One thing we won’t do: quote a number on the phone and stick to it no matter what. A phone description can’t see a bent track or a cracked panel. The written estimate after a real look is the honest number.
Can You Repair a Garage Door the Same Day in Cambridge?
Yes, in most cases. Spring, cable, roller, track and opener repairs are commonly done same day, and we handle the full door and opener system, residential and commercial-grade, so the common failures are work we do constantly. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. If your door fails outside those hours, call anyway – a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Emergency work is a core part of what we do, not an upsell. When a car is trapped, a home is sitting open, or a business can’t operate, that door needs to move. The price is still set per job by the written estimate, same as any other job.
A Word on Springs and Safety
Garage door springs are under extreme tension, and they’re one of the most dangerous components in any home. A spring under tension can cause serious injury if it’s handled wrong, and cables are under the same load. This is not a job to take on yourself, and it’s not a job for a general handyman who hasn’t done it before. Spring repair is a named specialty of ours, and it’s the job generalists most often avoid or get wrong. If a spring has snapped, leave the door closed, keep it off the opener, and call a trained professional. We’ll get there and do it right.
Why Choose a Garage Door Specialist in Cambridge?
A general contractor who installs doors as a side job can install a door. But when a door won’t close right, or an opener faults intermittently, or a spring is on its way out, the difference is diagnosis. Garage doors are all we do – repair, opener repair, spring repair, and full installation. That focus is why we know the differences between a LiftMaster opener fault and a Genie one without guessing, and why we can tell you whether your Clopay panel is repairable or needs replacement.
Our technicians have up to 11 years of experience, we know the eight major brands, and we’re set up for emergency calls because that’s when garage doors actually fail – not on a convenient schedule. When your door won’t move, we will. Fast dispatch from 7am to 7pm, Sunday through Friday, with same-day service as a real promise, not a marketing line.
And if you’re evaluating your options, a page about how to choose the right garage door company is worth a read before you commit to anyone.
FAQs – Garage Door Cost
How much does garage door repair cost in Cambridge?
Garage door repair in Cambridge typically runs $150 to $600, depending on the failure. A cable or track job sits at the low end, an opener repair at $120 – $320, and a spring replacement at $180 – $340 for one spring. Call (866) 254-2156 for an exact quote – estimates are free.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper when the door structure is sound: spring, cable, roller and opener repairs all fall well under the cost of a new door. Replacement starts making sense when panels are cracked or rusted through, when the door has multiple failing parts at once, or when the hardware is so old that repairs keep stacking up. New door installation runs $700 – $2200 in Cambridge. Call (866) 254-2156 and we’ll quote both so you can compare.
How much does spring replacement cost in Cambridge?
Spring replacement in Cambridge costs $180 to $340 for one spring. Because garage doors carry a matched pair and both springs wear together, replacing the pair is usually the right move, at about twice that range. Call (866) 254-2156 to book a free estimate.
Can you come today if my door is stuck?
Usually yes. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, means most stuck doors get a technician the same day. A call outside those hours is booked into the next opening. Call (866) 254-2156 and we’ll get you scheduled.
How much does a new opener cost installed in Cambridge?
Opener installation in Cambridge runs $250 to $550, depending on the opener and how much of the existing hardware can be reused. If the current motor just needs repair rather than replacement, that’s $120 – $320. We work on LiftMaster, Chamberlain, Genie, Craftsman and the rest of the major brands. Call (866) 254-2156 for an exact quote.
Do you charge for estimates?
No. Estimates are free, and the price is set per job by the written estimate. Call (866) 254-2156. We answer 24/7.
What Happens When You Call
You describe what the door is doing. We ask a few questions – brand if you know it, whether it moves at all, whether anything’s visibly broken – and then we set a time. A technician looks at the door, diagnoses the actual failure, and hands you a written estimate before any work starts. You approve it or you don’t. That’s the whole process. No pressure, no hard sell, no phone quote that changes when someone shows up.
Get Your Free Estimate
Whether it’s a snapped spring, an opener that won’t respond, a track that’s out of line, or a door you’re weighing replacing, the fastest way to a real number is a call. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment, and springs are our specialty. Call (866) 254-2156 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. The right part, the right brand, done right.
Pricing reflects the Cambridge market as of 2026. Cambridge Garage Door Repair Pros offers free estimates – call (866) 254-2156.
Written by the team at Cambridge Garage Door Repair Pros.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Danielle Norris"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Steve Anderson"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Anika Mehta