Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Arlington?
Garage door repair in Arlington, MA typically costs $150 – $600, depending on what’s actually broken and which parts are involved. A single spring repair usually runs $180 – $340, while a new door installation generally lands between $700 and $2,200. Those are typical estimated ranges for the Arlington market; the written estimate sets the final price, and we give that estimate for free before any work starts.
Arlington garages sit in a tough spot. The freeze-thaw cycle that runs from December through March puts constant stress on springs and cables, and a lot of the housing stock around town has older single-car and two-car doors that are well past their original hardware. That’s why we treat every call as a diagnostic first, parts second. Garage doors are all we do, so when we walk up to your door we’re reading the springs, the cables, the tracks and the opener as one system, not four separate problems.
Our technicians have up to 11 years of experience across the brands that show up in Arlington garages most: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. If you want to know exactly what your situation should cost, call (866) 254-2156. We answer 24/7, and dispatch runs fast from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical garage door repair in Arlington runs $150 – $600; the written estimate is the price you pay.
- One spring is $180 – $340. A matched pair is usually replaced together, so expect roughly double for the pair.
- Opener repair is $120 – $320; a new opener install runs $250 – $550.
- A full new door installation is $700 – $2,200 depending on size, material and insulation.
- Estimates are free. Call (866) 254-2156 and we’ll tell you what’s actually wrong before quoting anything.
Garage Door Cost Breakdown (2026)
Here’s the line-item pricing we work from for Arlington jobs in 2026. These are typical estimated ranges, not final quotes. Two doors of the same size can land at opposite ends of a range once we get the door open and see the condition of the hardware behind it.
| Service | Typical estimated range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
One thing worth understanding about spring pricing: torsion and extension springs are sold and priced per spring. Most doors run a matched pair, and when one breaks the other has absorbed exactly the same load cycles, so we usually recommend replacing both at once. That means a pair lands at roughly twice the single-spring range. We’ll always explain which setup your door has before we touch anything.
What pushes a job toward the top of its range? A snapped spring on a double-wide door with a heavy insulated panel. A bent track that threw the door off alignment and took a roller or two with it. A LiftMaster opener with a failed logic board rather than a worn gear. What keeps it near the bottom? Single-spring replacement on a standard door, a cable that frayed but didn’t take anything else with it, a roller swap on a door that’s otherwise sound. The right part, the right brand, done right is the whole idea, and that starts with not selling you a full door when a $110 – $220 roller set solves the noise problem.
What Affects Garage Door Pricing in Arlington
- Door size and weight. A single-car door in a vintage Arlington garage uses lighter springs and fewer panels than a two-car door, and the labor and parts scale with it. Heavier insulated doors need heavier-gauge springs, and those cost more.
- Which system your door runs. Torsion springs mounted on a shaft above the door and extension springs running along the sides are different jobs with different parts. Torsion work takes longer and is the job we see mishandled most often by generalists.
- Brand and part availability. A Genie opener with a straightforward motor problem is a simple fix. A Raynor or Amarr door with a discontinued panel profile might need a compatible replacement rather than an exact match, and that affects both the part and the labor.
- Whether it’s one component or several. A door that won’t open is sometimes a dead opener, sometimes a broken spring, sometimes a cable off its drum. Diagnosing correctly is what keeps the bill near $150 instead of climbing toward $600, because we’re not replacing parts that are still doing their job.
- Season and weather timing. Cold snaps in Arlington tend to break springs in clusters. When the temperature drops hard, the metal gets less forgiving and failures spike. If your door is already noisy or slow, that’s the moment to have it looked at rather than waiting for the snap.
- Emergency timing. If your car is trapped inside or the house is standing open, we treat that as an emergency call, which is a core part of what we do rather than an upsell. Pricing is still set per job by the written estimate, and dispatch runs fast from 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening.
How to Save on Your Garage Door
The single biggest saver is diagnosing before replacing. A door that’s loud, jerky or slow is often a $110 – $220 roller and track-lube job, not a new door. Call for a free estimate and let someone who works on garage doors all day tell you what’s actually worn out. A few practical habits that keep Arlington doors out of the expensive end of the table:
- Get a free written estimate before anyone touches the door. We put the price in writing up front, and that’s the number that stands.
- When one spring breaks, ask about replacing the pair. It feels like spending more today, but a matched set fails together, so replacing one at a time usually means paying for the job twice.
- Don’t ignore a slow or uneven door. A track realignment at $120 – $240 is a lot cheaper than the panel and cable damage that follows a door that binds for months.
- Keep the opener matched to the door. A budget opener straining against a heavy insulated door wears out faster. When a new opener goes in at $250 – $550, the brand and lift rating should fit the door you actually have.
- Ask about the brands we work on. If you own a LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman or Raynor system, your opener or door is hardware we know cold, which usually means a faster, cleaner diagnosis.
If you’re weighing a repair against a full replacement, that’s exactly the conversation to have on the phone before anyone comes out. We’ll talk it through honestly. Call (866) 254-2156 and we’ll book a free estimate, or read more about what we do at Cambridge Garage Door Repair Pros.
FAQs – Garage Door Cost in Arlington
How much does garage door repair cost in Arlington, MA?
Garage door repair in Arlington typically costs $150 – $600, with most common fixes falling in the lower half of that range. The written estimate sets the final price, and the estimate itself is free. Call (866) 254-2156 for an exact quote.
How much does garage door spring repair cost in Arlington?
Spring repair in Arlington typically costs $180 – $340 for one spring. Because matched pairs are usually replaced together, a full pair runs about twice that single-spring range. Call (866) 254-2156 to get the estimate in writing before work begins.
Is it cheaper to repair a garage door or replace it?
Repair is almost always cheaper, and it’s the right call whenever the panels and structure are sound. A spring, cable or opener fix at $120 – $340 beats a new door at $700 – $2,200. Replacement makes sense when panels are rusted through, the door is badly out of square, or repeated repairs are adding up. Call (866) 254-2156 and we’ll give you a straight answer on which side of that line your door sits.
How much does a new garage door cost in Arlington?
A new door installation in Arlington typically runs $700 – $2,200, depending on the door size, material, insulation level and whether the opener needs updating at the same time. Call (866) 254-2156 for a free estimate on your specific door and opening.
Can you come out today?
Yes, same-day service is available. We answer 24/7, and dispatch runs fast from 7am to 7pm, Sunday through Friday; a call outside those hours is booked into the next opening. If your car is trapped or the house is standing open, tell us on the call and we’ll prioritize it. Call (866) 254-2156.
A quick word on safety, because it matters here more than in most trades. Garage door springs and the cables that run to them are under extreme tension, and a single wrong move during a spring or cable job can cause serious injury. This is not a component to work on yourself, and it’s not a job for a general handyman who treats a garage door as a side task. Springs, openers, panels: they belong with a specialist who does this every day. Cambridge Garage Door Repair Pros works on the complete system, from LiftMaster, Chamberlain and Genie openers to Clopay, Amarr, Wayne Dalton, Craftsman and Raynor doors, and connects Arlington homeowners with vetted local professionals who handle it safely.
Ready for a real number instead of a range? Call (866) 254-2156 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Arlington market as of 2026. Cambridge Garage Door Repair Pros offers free estimates – call (866) 254-2156.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Danielle Norris"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Steve Anderson"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Anika Mehta