Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Cambridge?
Spring replacement in Cambridge typically costs $180 – $340 for one torsion spring, and most homes need both springs changed at once, which puts a matched pair at roughly $360 – $680. That estimate covers the springs, the labor, and a proper rebalance of the door. The written estimate you get before any work starts is the price that counts.
Cambridge Garage Door Repair Pros handles springs as a specialty, not a side job. Springs are the highest-risk part of any garage door system, and we treat them that way. Our technicians have up to 11 years of experience, and we work on doors and openers from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Call (866) 254-2156 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Key Takeaways
- One spring: typically $180 – $340. A matched pair: roughly $360 – $680.
- Most Cambridge doors run two springs, and replacing them as a pair is standard practice.
- Torsion springs sit under high tension. This is not a job to attempt without training and the right winding bars.
- Estimates are free, and the written quote sets the final price.
- Same-day service is often possible when you call early.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down for Cambridge homeowners. These are typical estimated ranges for the local market, and each job gets its own written quote.
| Line Item | Typical Estimated Range |
|---|---|
| One torsion spring, replaced | $180 – $340 |
| Matched pair of springs | About twice the single-spring range ($360 – $680) |
| Spring replacement bundled with cable repair | Cable repair adds $130 – $250 |
| Roller replacement alongside spring work | $110 – $220 |
| Track realignment if the door shifted | $120 – $240 |
| General garage door repair (broader fixes) | $150 – $600 |
| Opener repair if the motor was strained | $120 – $320 |
A single snapped spring is the common call. But when one spring breaks, the second one has usually absorbed the whole load and is close behind it. That’s why we recommend replacing a pair together, and why we quote a pair at about double the single-spring range rather than pretending one new spring and one tired spring will balance the door. What pushes a job toward the top of the range: heavy insulated doors, high-lift or unusual track setups, springs that are rusted into their winding cones, or a door that also needs cables, rollers or track work. What keeps it near the bottom: a standard single-car door with two accessible torsion springs and nothing else wrong.
What Affects Spring Replacement Pricing in Cambridge
- One spring or two. The single biggest factor. A one-spring door sits at $180 – $340; a two-spring door is quoted as a pair at about twice that. We tell you which you have before we start.
- Spring type and size. Torsion springs (mounted on a bar above the door) and extension springs (running along the sides) are priced differently, and heavier doors need heavier wire gauge springs that cost more.
- Door weight. Cambridge has plenty of older two-car garages with solid wood doors, which are heavier than modern steel panels and need stronger springs to counterbalance them.
- Condition of the surrounding hardware. A failed spring often takes cables, rollers or a track with it. If the door dropped or jumped when the spring let go, expect the quote to include those parts.
- Access and ceiling height. Low-clearance garages, tight alley-side bays, and doors with storage or shelving close to the torsion bar all add time to the job. Cambridge’s dense neighborhoods mean a lot of garages are squeezed into small footprints.
- Winter salt and road grit. Springs and cables exposed to grit tracked in off Cambridge streets corrode faster, and a rusted spring assembly can take longer to disassemble safely.
Cambridge garages vary more than most people expect. A door on a narrow side street off Mass Ave may have a low headroom setup, while a newer build near Kendall Square might have a high-lift track that changes the spring spec entirely. The quote follows the door in front of us, not a flat rate.
How to Save on Spring Replacement
Spring pricing is fairly fixed by the parts and labor involved, but there are real ways to keep the bill down.
- Replace both springs at once. Paying for a pair now costs less than two separate single-spring visits, and it avoids being stranded when the second spring fails.
- Deal with small issues before they grow. A noisy roller or a slightly off track is cheap to fix on its own. Left alone, it strains the springs and the opener, and the repair list gets longer.
- Get the estimate in writing before work begins. Free estimates are standard for us, and a written quote stops surprises. Call (866) 254-2156 to set one up.
- Ask about the rest of the system while we’re there. If your rollers or cables are near the end of their life, bundling the work into one visit usually saves on labor compared with booking two separate jobs.
- Don’t run the opener on a broken spring. Forcing the motor to lift a door with no counterbalance can burn out the opener and turn a spring job into a spring-and-opener job.
If you want the full picture of how we handle this work, our spring replacement page covers the process from diagnosis to rebalance. You can also see everything we handle on our Cambridge Garage Door Repair Pros page.
Why Springs Fail in Cambridge
Every torsion spring has a finite number of cycles. One open and close is one cycle. A household that uses the garage as its front door twice a day racks up cycles fast, and a spring rated for a certain cycle count simply wears out. In Cambridge, two local habits speed that up. First, many homes use the garage as the main entry, so the door runs far more often than a door used only for parking. Second, the freeze-thaw swings through a New England winter work grit and moisture into the spring assembly, and corrosion shortens spring life. When a spring goes, it usually goes with a loud bang, and the door becomes too heavy to lift by hand. That’s the moment to stop pulling on it and call a professional.
A word on safety. Torsion springs store an enormous amount of energy, and winding or unwinding one without the right bars and training can cause serious injury. We don’t publish step-by-step instructions for that reason. If your door won’t lift, leave it down and let a trained technician handle the spring. It’s the one part of a garage door we’d never suggest a homeowner tackle alone.
Repair or Replace: What Makes Sense
If the door itself is sound, replacing the springs is almost always the right call, and it’s far cheaper than a new door. New door installation in Cambridge typically runs $700 – $2,200, while spring replacement sits at $180 – $340 per spring. The exception is an older door with failing panels, bent tracks, and worn hardware all at once. In that case, putting money into springs alone may not be the best spend, and we’ll tell you so honestly. For a door that just needs a panel or two, panel replacement runs $250 – $500, which is often the sensible middle path.
If the opener is also struggling, opener repair runs $120 – $320, and a full opener installation runs $250 – $550. We work across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so the parts match the equipment you already own. If you’d rather take in the whole range of what we do, our garage door repair in Cambridge page lays it out, and our main Cambridge garage door services page covers the full scope from springs to openers.
When to Call for Spring Replacement
Some signs mean call now, not next month:
- A loud bang from the garage, followed by a door that won’t lift.
- A visible gap in a torsion spring, or two separated coils on an extension spring.
- The door feels extremely heavy when you try to raise it by hand.
- The door rises a foot and stops, or the opener strains and clicks.
- The door hangs crooked, which can mean a broken spring on one side.
If any of that sounds familiar, stop using the door. A car trapped inside or a house left open is exactly the situation our emergency service is built for. We answer 24/7, and fast dispatch runs from 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday.
FAQs – Spring Replacement Cost
How much does garage door spring replacement cost in Cambridge?
Spring replacement in Cambridge typically costs $180 – $340 for one spring, or roughly $360 – $680 for a matched pair, which is what most homes need. The written estimate sets the final price. Call (866) 254-2156 for a free quote.
Do I need to replace both springs at once?
In most cases, yes. A matched pair usually costs about twice the single-spring range ($360 – $680), and replacing both together is cheaper than two separate visits. The second spring has taken the full load when the first one breaks, so it’s usually close to failing too. Call (866) 254-2156 and we’ll tell you what your door needs.
Can you replace my springs the same day?
Often, yes. Same-day service is frequently possible when you call early, and we carry the common spring sizes for the brands we service. We answer 24/7, with fast dispatch from 7am to 7pm. Call (866) 254-2156 to check availability for your Cambridge address.
Is it cheaper to repair the springs or replace the whole door?
Repairing the springs is almost always cheaper. Spring replacement runs $180 – $340 per spring, while new door installation runs $700 – $2,200. A new door only makes sense when the panels, tracks, and hardware are all failing at once. Call (866) 254-2156 for a free estimate and an honest read on which way to go.
Why did my spring break, and can I prevent it?
Springs break from cycle fatigue and corrosion, not bad luck. A door used several times a day wears out faster, and grit from Cambridge winters speeds corrosion. Lubricating the springs and hinges periodically and fixing a noisy roller or a slightly off track early can extend spring life. If your door already feels heavy or won’t lift, call (866) 254-2156. Estimates are free.
Pricing reflects the Cambridge market as of 2026. Cambridge Garage Door Repair Pros offers free estimates – call (866) 254-2156.
Written by the team at Cambridge Garage Door Repair Pros.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Danielle Norris"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Steve Anderson"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Anika Mehta